Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Kent Homeowners
A garage door that has started to sag, stick, or refuse to close puts a lot of your day on hold. When the panels are rusted through, the frame is twisting, or the opener keeps re-triggering on a bent door, installation is the honest answer. Our technicians have up to 15 years of experience with the equipment installed on homes around Kent, from older single-width doors to newer insulated double-car models. We carry a strong local reputation for installing the brand you already own rather than steering you toward whatever is on the truck. The local professional we connect you with is licensed and insured as their state requires. We’re a full-service garage door company for Kent: new installations, single and double doors, custom sizing, steel and wood. Call (866) 937-7308. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What Our Garage Door Installation Service Includes
Installation isn’t one job. A steel door on a standard opening is a different build from a custom wood unit sized for a narrow older garage, and we quote each one separately. Here’s what each sub-service covers in Kent.
New Door Installation
New door installation means removing the existing door and hardware, checking the opening and track alignment, and hanging a replacement door with a fresh spring system and proper balance. You need it when the old door has reached the end of its service life, when the frame has shifted enough that the door won’t sit flush, or when you’re replacing a damaged unit after an impact. We measure the opening, order the right door, and set it with the track, springs, and hardware matched to the new panel weight.

Single Car Door
A single car door is the standard one-vehicle width door, typically hung on a narrower opening and lighter than a double. You’d order one when a single-bay door has rusted through at the bottom section, when the panels have separated from the stiles, or when you’re replacing an uninsulated builder-grade door. We size the door to the actual opening rather than assuming standard dimensions, because garage openings on older homes rarely match the plan.

Double Car Door
A double car door is the wider two-vehicle door, and the extra width puts more stress on the springs, cables, and track than a single ever does. You need a fresh install when the current door is twisting under its own weight, when the hinges are wallowing out the panel edges, or when the door is simply too heavy for the opener you have. We match the spring and opener capacity to the door’s weight so it moves evenly across the full width.

Custom Garage Door
A custom garage door is built to a non-standard opening, a specific architectural style, or a size that isn’t available off the shelf. You’d go custom when the opening is out of square, when an unusual height or width rules out standard stock, or when the house was built to a style that needs matching panels. We measure carefully, walk through material and window choices with you, and order to the measured opening so the fit is right.
Steel Doors
Steel doors are the most common choice in Kent because they hold up to wet weather, resist denting better than thin aluminum, and cost less than wood. You’d choose steel when you want a low-maintenance door that keeps its shape through damp winters and hot dry summers. We install steel doors in insulated and uninsulated builds, and we match the spring to the door’s actual weight so the balance stays right.
Wood Doors
Wood doors offer a natural look that suits Craftsman and traditional homes, and they can be repaired and refinished rather than replaced. You’d pick wood when the house has painted trim or a style that steel can’t match, or when you want a door that can be recoated down the road. Wood moves with moisture, so we set the hardware and track to allow for that expansion and keep the door operating smoothly.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on the brand you already have, which matters when the door you’re replacing came with a specific opener or hardware line. We service Amarr doors and know how their panel and section construction wears over time, so we can match a replacement section or a full door to the same profile. We also handle Wayne Dalton equipment and understand the differences in their track and hinge hardware that affect how a new door settles in. Craftsman and Raynor doors are part of our regular work too, and we’re familiar with the older hardware those brands used on homes around Kent.
Brand familiarity saves time on installation day. When the technician arrives already knowing the hardware on the job, measuring and fitting go faster and there’s less guesswork about whether the existing opener and track will work with the new door. Whether you have Amarr or any other make, we can help. We also service LiftMaster and Chamberlain openers if the door and opener are being replaced together.
Signs You Need Garage Door Installation Right Now
- The door sags or won’t sit level. When one side of the door hangs lower than the other, the panels or frame have likely shifted. A sagging door puts uneven load on the springs and can bind in the track. If adjusting the hardware doesn’t correct it, the door itself needs replacing.
- Panels are cracked, dented, or rusted through. A dented panel is often a repair job. But when rust eats through the bottom section or cracks spread across the stiles, the door has lost structural strength. A door that’s failing at the bottom lets water and pests in.
- The opener re-triggers or reverses repeatedly. A door that reverses on the way down usually means the door is binding or the safety sensors are misaligned. If the door is bent or the panels are separating, no opener adjustment will fix it. That’s a door problem, not an opener problem.
- The door is very old and you’re replacing parts often. A door that needs a new roller here, a new hinge there, and a cable the following month is telling you it’s reached the end. Repeated small repairs add up, and the door’s structure is usually the cause.
- The frame or opening is out of square. An out-of-square opening makes a door bind no matter how well it’s hung. If the opening has twisted, the door has to be measured and fitted to the actual opening rather than a standard size.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and written estimate. We measure the opening, the headroom, and the side clearance, check the existing track and opener, and put the door options and price in writing before anything is ordered. The estimate is free and the price is set per job by the written estimate, quoted and agreed before any work starts.
- 2
Door selection and ordering. We walk through steel, wood, single, double, and custom options with you, match the door to the opening, and order the panel and hardware. For installation work, this step is measured and scheduled rather than done on the spot.
- 3
Removal of the old door. On install day, the old door, track, and hardware come down. We check the opening and frame for damage while the old door is off, since that’s the only time you can see the full opening.
- 4
Hanging the new door. The new track goes up, the panels are set, and the springs, cables, and hinges are mounted and balanced. The spring and cable work is a two-person, proper-tools job, and our technicians handle it with the safety protocols the job requires.
- 5
Balance, test, and walkthrough. We test the door through a full open-and-close cycle, check the balance and the opener safety reverse, and walk you through the operation. If anything needs adjustment, we handle it before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Kent?
Garage door installation in Kent typically runs $700 – $2,200 depending on the door type, size, material, and whether the opener is being replaced at the same time. Those are estimated ranges, and the written estimate sets the final price.
| Job | Typical estimated range |
|---|---|
| New door installation (single or double) | $700 – $2,200 |
| Opener installation (if replaced with the door) | $250 – $550 |
| Panel replacement (repair instead of full install) | $250 – $500 |
What affects the price: door width and material, insulation, window options, custom sizing, and whether the opener and track are being replaced. Wood costs more than steel, and a custom-sized door costs more than a standard stock size.
How to avoid overpaying: get the written estimate before ordering, ask whether a panel replacement would fix the problem instead of a full install, and confirm what’s included (removal, track, springs, opener). A free estimate should spell all of that out.
For an exact quote, call (866) 937-7308. Estimates are free, and we quote before any work starts.
Garage Door Installation Near Kent – Our Service Area
We connect homeowners in Kent with local professionals across the surrounding area, including Covington, Auburn, Renton, Tukwila, Fairwood, SeaTac, Federal Way, and Des Moines. Response times depend on the schedule for measured work, and installation is booked after the free measure and written estimate. For nearby cities, our Kent Garage Door Repair Co team covers the wider area. We also handle garage door installation in Lakeland North and garage door installation in Des Moines.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Kent
Garage door installation is the job of removing an existing door and hanging a new one, including the track, springs, cables, hinges, and hardware. It’s different from a repair, which fixes a specific part of a door that’s otherwise sound. Installation is the right call when the door’s structure has failed or the opening needs a door that fits properly. Call (866) 937-7308 for a free estimate.
A standard single or double door installation usually takes a few hours once the door is on site, and the measure and order add time before install day. Custom doors and wood doors can take longer because of sizing and finish work. We give you a clear timeline with the written estimate so you know what to expect. Call (866) 937-7308 to schedule your measure.
Garage door installation in Kent typically runs $700 – $2,200 depending on the door type, size, material, and whether the opener is replaced. Custom and wood doors sit at the higher end, and standard steel doors at the lower end. The written estimate sets the final price, and we quote before any work starts. Call (866) 937-7308 for an exact quote; estimates are free.
Yes. We service Amarr, Wayne Dalton, Craftsman, and Raynor doors, along with LiftMaster, Chamberlain, Genie, and Clopay equipment. Brand familiarity means the technician already knows the hardware on the job. Whether you have Amarr or any other make, we can help. Call (866) 937-7308 to talk through your door.
Same-day service fits repair and emergency work, not installation. New door work is measured, ordered, and scheduled, so we never promise a same-day install. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7308 to book your free measure.
Warranty terms depend on the door manufacturer and the work performed, and the written estimate spells out what’s covered. We walk you through the manufacturer’s coverage and our workmanship terms before you commit. That way there are no surprises after the door goes in. Call (866) 937-7308 with questions about coverage.
Clear the garage floor and the driveway in front of the door so the technician has room to work and set the old door down safely. Move vehicles, bikes, and anything stored against the door or track out of the way. Keep the opener remote handy so the old door can be tested before removal. If you have questions about prep, call (866) 937-7308.
Schedule Your Garage Door Installation Service in Kent Today
When your door has reached the end of its service life, a free measure and a written estimate tell you exactly what the job costs before anything is ordered. Call (866) 937-7308. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. You get a no-obligation estimate, the price quoted and agreed before any work starts, and a door hung and balanced by technicians who’ve done it before. The local professional is licensed and insured as their state requires. Let’s get your garage back to working.
Written by the team at Kent Garage Door Repair Co.