Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kent
Garage door installation in Kent, WA typically runs $700 – $2,200 for a standard new door, and every job begins with a free on-site measure and a written price you agree to before we start. If you live here, you already know what the Green River Valley does to metal and wood. The same damp that fogs up the valley on a fall morning works on bottom seals, hinges, and steel tracks until a door that looked fine in July starts catching on the way down. We connect Kent homeowners with independent local pros who work on the door that’s already hanging in your garage, not just a showroom catalog. Call (866) 937-7308 and we’ll set up the measure. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
Why Kent Homeowners Call Kent Garage Door Repair Co for Garage Door Installation
Kent’s housing tells the story better than any sales pitch. East Hill and Panther Lake are full of 1960s-through-1980s ranch and split-level tract homes with single-car or two-car attached garages, and a good share still have their original wood or early steel sectional doors. Those doors were built for a drier climate than the valley delivers. When we measure one of those garages, the conversation usually turns on a real question: is this door worth repairing, or has it reached the point where a new door makes more sense?
That’s where our repair-first approach matters. We’re not going to talk you into a replacement because the panels look tired if the hardware underneath is sound. And we’re not going to patch a door that’s binding on warped tracks and hauling a tired opener along with it. Our technicians have up to 15 years of experience and they’re certified to service eight major brands, including Craftsman, Raynor, LiftMaster, and Chamberlain, so they arrive already familiar with the hardware on the job.
For Kent customers, response time matters. A door that won’t close leaves the house open. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician headed your way Sunday through Friday. Free estimates, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kent
Installation work here is measured, ordered, and scheduled. That means a free measure first, a written price second, and a door spec’d for the way Kent’s weather actually treats hardware.
New Door Installation
A full new door installation in Kent runs $700 – $2,200 for a typical single or double door, and the range covers everything from a builder-grade steel door to a heavier insulated model. On East Hill and Panther Lake, where garages are often cut into a sloped lot, we look hard at how runoff reaches the door before choosing a seal and hardware package. A door that faces downhill water needs different bottom sealing than one sitting on flat ground.

Single Car Door
Most of Kent’s older valley homes have a one-car attached garage, and a single-car door is often the simplest swap when the original has rotted at the bottom. The measure here is about clearance and headroom as much as width. If the old door was a one-piece swing-up, moving to a sectional changes the tracks and the opener, so we price that as part of the job up front.

Double Car Door
Two-car garages are common in the 1990s and 2000s subdivisions near Kent Station, and a double door carries more weight and more wind load than a single. That makes balance and hardware quality worth spending on. A heavier door on builder-grade hinges and rollers is the kind of setup that starts binding a couple of winters in.

Custom Garage Door
Custom work in Kent usually means matching an older home’s look, often wood, on a street where a plain steel door would stand out. We can size a custom door to an existing opening and spec wood or a wood-look steel that holds up to the valley’s damp better than the original did. Expect the written estimate to lay out door, tracks, hardware, and opener separately so you can see where the money goes.
Trusted Brands We Service in Kent
We work on the brand you already have. Our technicians are certified to service eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. For a new install, that means we can match a door and opener that work together rather than steering you toward whatever’s easiest to order. For a repair, it means the technician recognizes the hardware before touching it. We don’t stock parts in Kent or anywhere else; we source what the job needs and schedule the work around the order. If you’ve got an older Craftsman opener paired with a Clopay door, that combination is familiar ground.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Kent Homes
Kent’s position in the Green River Valley shapes almost every call we get. The valley holds damp and river fog longer than the hillsides around it, so the dominant failure here isn’t just a snapped spring. It’s rust and seal failure working on a door year after year.
- Corroded bottom weather seals. Standing water after heavy rain soaks the bottom seal, and once it’s saturated the wood or steel behind it starts to rot. A door that lets a draft under the bottom edge is usually telling you the seal is done.
- Rusted torsion springs and cables. Constant valley damp goes after springs and cables the same way it goes after everything else steel. A spring that’s been slowly rusting can break without much warning, which is why we treat spring work as a two-person, proper-tools job.
- Warped or misaligned tracks. Repeated moisture exposure warps tracks, and a warped track makes a door noisy, then stuck. On sloped lots the runoff problem makes this worse.
- End-of-life builder-grade openers. Many original openers in Kent’s older tract homes are simply past their service life. A strained opener on a binding door won’t last, so we check balance and alignment before recommending an opener replacement.
Pricing for Garage Door Installation in Kent, WA
These are typical estimated ranges for the Kent market, and the written estimate sets the final price.
| Work | Typical estimated range in Kent |
|---|---|
| New Door Installation | $700 – $2,200 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
What moves the number is door size, material, insulation, and how much of the old hardware has to go. A steel door on sound tracks prices differently from a wood door with corroded hinges and a rotted bottom rail. The estimate is free, and the price is quoted and agreed before any work starts. If you need a repair to get you through instead of a full install, garage door repair in Kent runs $150 – $600. Call (866) 937-7308 for an exact quote.
We Also Serve Cities Near Kent
We work with homeowners across Kent and out into the surrounding area, including Covington, Des Moines, Federal Way, and Auburn. The damp valley conditions thin out as you climb toward the hillsides, but the older housing stock follows you. If you’re outside Kent proper and want a new door measured, our garage door installation team can set that up. Call and we’ll get you on the schedule.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kent
Kent’s valley damp and river fog shorten the life of steel hardware and wood door bottoms faster than drier climates do, so a new door’s lifespan here depends more on seal and hardware quality than on the panels themselves. A heavier-duty vinyl bottom seal, stainless hinges, and regular lubrication are what keep a new door going in the valley. Call (866) 937-7308 and we’ll talk through what spec makes sense for your garage.
Repair usually wins if the frame, tracks, and panels are sound and only the bottom rail or hardware has gone bad; replace when the door is binding, rotting through multiple panels, or hauling a failing opener. On East Hill and Panther Lake we see plenty of originals that are worth one more round of work and plenty that aren’t. A free measure sorts it out. Call (866) 937-7308.
A heavier-duty vinyl bottom seal is the better choice on East Hill and Panther Lake, where sloped lots send runoff right at the door and standing water sits against the bottom edge during fall storms. Standard builder seals soak through and rot the door bottom; the heavier vinyl holds up longer. Call (866) 937-7308 and we’ll spec the right seal for your grade.
Springs that are rusted, stretched, or making the door feel heavy when you lift it by hand are due, and a door that slams down or won’t stay up is a spring problem until proven otherwise. Don’t test a torsion spring by hand; spring repair is a two-person job with proper tools. Call (866) 937-7308 for an assessment.
Yes, in many cases a single bottom panel can be replaced on its own, and panel replacement in Kent typically runs $250 – $500. It only works if the panel is still available and the tracks and frame are straight, so the measure comes first. Call (866) 937-7308 for a free estimate.
Written by the team at Kent Garage Door Repair Co.