Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Kent?
New garage door installation in Kent typically costs $700 to $2,200, including the door, hardware, and professional installation. A single-car door on a standard opening usually lands near the lower end, while a double door with windows, insulation, or a premium brand pushes toward the top. Opener installation, if you need one at the same time, runs $250 to $550 on top. The written estimate sets the final price.
That range covers most of what homeowners in Kent actually buy. We work on the brand you already have, and if you’re starting fresh, we install doors from Clopay, Amarr, Wayne Dalton, Raynor, and other manufacturers we’re certified to service. Our technicians have up to 15 years of experience with the exact hardware on your job.
Key Takeaways:
- Typical new door installation in Kent: $700 – $2,200
- Opener installation adds $250 – $550
- Panel replacement, if only part of the door is damaged, runs $250 – $500
- Free estimates, upfront pricing, and a repair-first approach so you don’t replace a door that can be fixed
- Emergency service available when a failed door leaves your home unsecured or your car trapped
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers break down for a typical Kent installation, along with the related repairs that sometimes come up while we’re on site. These are estimated ranges for the local market, not a quote.
| Job | Typical Estimated Range |
|---|---|
| New door installation (single or double, standard opening) | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Opener repair | $120 – $320 |
| Panel replacement | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range above. If your existing door still has good bones and the problem is a spring, cable, or opener, repairing is almost always the smarter call. That’s the repair-first approach we take: we tell you what’s actually wrong before anyone talks about a new door.
What pushes installation toward the top of the range? Door size, insulation, window inserts, brand, and the condition of the opening itself. A standard single door with basic hardware sits near $700. A double door with carriage-style windows, a high R-value insulated panel, and a new belt-drive opener from LiftMaster or Chamberlain can reach $2,200 or beyond. The estimate you get in writing is what you’ll pay.
What Affects Garage Door Installation Pricing in Kent
Kent sits in the Green River Valley, and the local housing stock shapes what installation costs here more than most homeowners expect. A few things move the number:
- Door size and opening dimensions. Many Kent homes in East Hill and the Panther Lake area have standard 16-by-7 double openings, but older properties near downtown Kent and the Kent Valley sometimes have non-standard widths that require custom panels.
- Insulation and window options. An insulated door costs more than a basic steel panel, but it matters in western Washington’s damp, cool climate. Condensation on an uninsulated door is common through the wet months.
- Brand and hardware. We’re certified to service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Premium Clopay or Amarr models sit higher than an entry-level Wayne Dalton.
- Opener compatibility. If you already have a smart-home-integrated opener from LiftMaster, Chamberlain, Genie, or Craftsman, we’ll match the new door’s weight and balance to it rather than sell you a replacement you don’t need.
- Structural or track work. A sagging header, damaged track, or worn rollers add to the job. Track realignment runs $120 – $240; roller replacement $110 – $220.
- Emergency timing. If a door has failed and your home is unsecured, we offer emergency garage door service. The price is still set per job by the written estimate.
The valley’s winter rain and the occasional windstorm also mean doors here take a beating on weatherstripping and bottom seals. It’s worth having those checked during an install so you’re not paying for a separate visit later.
How to Save on Garage Door Installation
You don’t need to cut corners to keep the cost down. A few practical moves help:
- Ask whether repair beats replacement. A panel replacement at $250 – $500 is far cheaper than a new door if only one section is dented or damaged. A spring repair at $180 – $340 is cheaper still. We’ll tell you honestly which one you need.
- Bundle the opener install with the door. Having the opener installed at the same time as the door avoids a second visit and usually keeps the total lower than two separate jobs.
- Choose a standard size. Off-the-shelf standard doors cost less than custom. If your opening can take a standard size, take it.
- Keep your existing opener if it’s healthy. We repair openers across LiftMaster, Chamberlain, Genie, and Craftsman. If yours works, there’s no reason to replace it.
- Get the free estimate in writing. Call (866) 937-7308 and we’ll give you an upfront price before any work starts. Estimates are free, and the written estimate sets the final price.
If you’re comparing repair versus full replacement, it helps to know what the whole scope looks like. Our garage door installation page walks through what a new install involves from start to finish.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Kent, WA?
A new garage door installed in Kent typically costs $700 – $2,200, depending on size, insulation, brand, and window options. A standard single door sits near the low end; a double door with premium features approaches the top. Call (866) 937-7308 for a free estimate tailored to your opening.
Is it cheaper to repair or replace a garage door in Kent?
Repair is almost always cheaper when the door’s structure is sound. A single panel replacement runs $250 – $500, and a spring repair is $180 – $340 per spring, versus $700 – $2,200 for a full install. If the door is rusted through, sagging, or repeatedly failing, replacement makes more sense. Call (866) 937-7308 and we’ll give you a straight answer.
How much does garage door opener installation cost in Kent?
Opener installation in Kent typically runs $250 – $550, and opener repair runs $120 – $320. If your existing LiftMaster, Chamberlain, Genie, or Craftsman opener is working fine, we’ll repair it rather than replace it. Call (866) 937-7308 for an exact quote.
Can you install a garage door the same day in Kent?
Same-day service is often possible for repairs and some installations, and emergency garage door service is available when a failed door leaves your home unsecured or your vehicle trapped. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 937-7308 to check availability.
How much does garage door repair cost in Kent?
General garage door repair in Kent typically costs $150 – $600, with the exact figure depending on the part involved. Spring repair is $180 – $340 per spring, cable repair $130 – $250, and track realignment $120 – $240. Spring repair is a two-person, proper-tools job, so it’s worth having trained technicians handle it. Call (866) 937-7308 for a free estimate.
Why Homeowners in Kent Call Us for Installation
We’re a full-service garage door company, which means the same team that installs your door also handles the opener, springs, cables, and any follow-up repair. You don’t need a second contractor. We’re certified to service eight of the most widely installed brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we arrive familiar with the hardware on your job.
Our technicians have up to 15 years of experience, and spring repair in particular is handled by trained technicians using proper tools and safety protocols. A torsion spring under tension can cause serious injury if it’s worked on without the right equipment. That’s not a job for a homeowner with a pair of vice grips.
Whether you need a snapped spring fixed or a whole new door installed, you can start at Kent Garage Door Repair Co and we’ll point you in the right direction.
Get a Free Estimate on Your Kent Garage Door Installation
If you’re ready to replace a worn door or you’re not sure whether repair will do, call (866) 937-7308 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll give you an upfront price, a clear recommendation, and get you back up and running.
Pricing reflects the Kent market as of 2026. Kent Garage Door Repair Co offers free estimates – call (866) 937-7308.
Written by the team at Kent Garage Door Repair Co.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Nathan Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Neil Rao"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Mendoza