Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Kent Homeowners
A garage door that won’t close leaves your home open, and one that won’t open traps your car inside. Either way, you need a straight answer fast: what broke, whether it can be fixed, and what it will cost. We repair garage doors across Kent, from a snapped spring to a bent track, and we work on the equipment you already have. Our technicians have up to 15 years of experience with the leading brands, and we take a repair-first approach – we don’t push a new door when a good fix will do. We offer same-day garage door repair in Kent when the schedule allows. Call (866) 937-7308 to get started.
What Our Garage Door Repair Service Includes
Panel Replacement
A garage door panel is one section of the door – the panels stack and travel together, and a single damaged section doesn’t have to mean a whole new door. You need panel replacement when a section is dented, cracked, or starting to separate from the frame after a bump or an impact. We match the panel to your existing door, whether that’s a section on an Amarr or a Wayne Dalton, and check that the surrounding panels still run smooth on the track before we call the job done.

Spring Repair
Springs are what counteract the weight of the door, and when one breaks the door becomes very heavy and dangerous to lift by hand. You’ll usually hear a loud snap and find the door won’t open, or opens a few inches and stops. Spring repair is a two-person, proper-tools job – a wound torsion spring holds serious stored energy – so we send trained technicians with the right winding bars and safety gear rather than risk you doing it yourself. We replace the broken spring and check the others while we’re there, since matched springs wear together.

Cable Repair
The cables run on either side of the door and wind around the drums, keeping the door level and lifting evenly on both sides. A frayed or snapped cable shows up as a door that comes down crooked, hangs at an angle, or won’t open at all. We replace the cables in pairs where they’ve worn together and re-tension them so the door lifts square. Cable and spring work go hand in hand, so we inspect both whenever we’re dealing with a lift problem.

Track Realignment
The tracks guide the door through its travel, and a bent or knocked-out track makes the door bind, scrape, or jump the roller. You’ll notice it if the door shudders, the gap on one side is uneven, or the door rubs against the frame. We straighten or reset the track back to a true run so the door travels smooth, and we check the brackets and rollers while we’re at it, since a bad track usually puts extra stress on the parts around it.
Roller Replacement
Rollers are the small wheels that ride in the track, and worn ones turn a quiet door into a rattling, grinding one. You’ll hear the noise, feel the door drag, or see flat spots and chips on the roller itself. We replace worn rollers and align the door so it rolls cleanly again, which also takes strain off the opener. Many rollers are cheap to swap, so this is often one of the simplest fixes on the list.
Sensor Calibration
The safety sensors at the base of the door send a beam across the opening and stop the door if something crosses it. When they’re misaligned or dirty, the door reverses before it reaches the floor or won’t close at all. We recalibrate the sensors, clear any obstruction, and test the reversing function so the door stops when it should. This is a quick job, but worth doing right, since it’s the safety system protecting anyone who walks under the door.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We focus on the brands most Kent homeowners actually have installed. We service Amarr doors and know where their panels tend to take a hit and how their hardware holds up over time. We work on Wayne Dalton doors and openers, and we’re familiar with their torsion and extension spring setups. If you have a Craftsman opener, we can troubleshoot the logic board, travel limits, and safety sensors without steering you toward a new unit.
We also service Raynor doors and LiftMaster, Chamberlain, Genie, and Clopay equipment, so the technician who shows up knows the hardware on your job rather than learning it as they go. Whether you have Amarr, Wayne Dalton, Craftsman, Raynor, or any other make, we can help.
Signs You Need Garage Door Repair Right Now
- The door won’t open or close all the way. A door that stops partway usually points to a broken spring, a bad cable, or an opener limit out of adjustment. Don’t force it – a door stuck partway with a broken spring can drop when you least expect it, so call a technician instead.
- You heard a loud snap from the garage. That sound is often a spring breaking, and the door will feel suddenly very heavy. The spring is under load, so leave it to a trained technician with the right tools rather than trying to lift the door by hand.
- The door comes down crooked or looks off-level. One side lower than the other means a cable, drum, or track problem, and running it that way can bend panels and wear out the opener. We track it down and get the door level again.
- Grinding, squealing, or banging while the door moves. Noise like that points to worn rollers, dry hinges, or a binding track. Ignoring it adds wear to every other part of the system, so it’s worth addressing early.
- The door reverses or won’t close on its own. This usually means misaligned or dirty safety sensors, or an opener problem. The door’s own safety system is trying to stop it, so get it checked before it fails for good.
Our Garage Door Repair Process – Step by Step
- 1
You call and we book it in. We ask a few questions to understand the symptom and get you scheduled, with same-day service where the schedule allows. We answer 24/7. Fast dispatch 7am-7pm, Sunday through Friday.
- 2
We diagnose on site. The technician cycles the door, listens for the noise, and checks the springs, cables, rollers, tracks, and opener settings. For opener faults, we test the sensor circuit and limits rather than guessing.
- 3
We give you a written price before any work. You get a clear quote with the parts and labor spelled out, and nothing starts until you’ve agreed to it. That’s the price the written estimate sets.
- 4
We do the repair. Springs, cables, and tracks get the proper tools and a two-person approach where safety calls for it. We test the door through a full cycle and check it’s balanced and level before we pack up.
- 5
We walk you through what we found. If something’s heading for trouble but isn’t urgent, we tell you so you can plan, without pushing an upsell. We’re a repair-first company, and the goal is a door that works right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Kent?
Garage door repair in Kent typically runs $150 – $600 depending on the problem. A broken spring repair generally runs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that. Cable repair typically runs $130 – $250, track realignment runs $120 – $240, and roller replacement runs $110 – $220. A damaged panel replacement runs $250 – $500, and opener repair runs $120 – $320. These are typical estimated ranges, and the written estimate sets the final price.
What moves the price: the part that failed, how many parts are worn together, the door’s size and weight, and whether the opener is involved. To avoid overpaying, ask for the price in writing before work starts and get the diagnosis explained in plain terms. Our free estimate includes the on-site diagnostic, the written quote, and a clear answer on whether a repair or a replacement makes more sense for your door. You’ll know the number before anyone turns a wrench.
Garage Door Repair Near Kent – Our Service Area
We handle garage door repair in Kent and the surrounding area, including Covington, Auburn, Renton, SeaTac, Tukwila, Federal Way, Des Moines, Fairwood, and Lakeland North. Response times depend on how busy the day is and where you are, but we work to get to you the same day when the schedule allows. For nearby cities, our garage door repair team covers Lakeland North, and we also serve garage door repair in Des Moines.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Kent
Garage door repair is the fix of a door that has stopped working or is running badly – a broken spring, snapped cable, bent track, worn roller, damaged panel, or an opener that won’t cycle. It covers the door and its components, and the goal is to bring the door back to a smooth, safe operation. We take a repair-first approach, so we look for the fix that solves the problem rather than steering you to a replacement you don’t need.
Most common repairs are done in a single visit, often within a couple of hours once the technician is on site. A spring or cable replacement is typically quick for a trained two-person team, while a bent track or panel replacement can take a bit longer depending on the damage. We’ll give you a realistic time frame when you book, so you’re not left guessing.
Most garage door repairs in Kent run $150 – $600, with the exact price set by the written estimate before any work begins. A spring repair typically runs $180 – $340 for one spring, cable repair $130 – $250, and track realignment $120 – $240. Call (866) 937-7308 for an exact quote – estimates are free.
Yes, we service Craftsman openers along with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, and Raynor equipment. We know where these units wear, from the logic board to the travel limits and safety sensors. If yours won’t open, reverses, or hums without moving, we can usually diagnose it on site and repair it rather than replace it.
Same-day garage door repair in Kent is available when the schedule allows, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7308 and we’ll get you on the schedule.
Yes – we stand behind our repairs with a satisfaction guarantee, and the local pro is licensed and insured as their state requires. We test the door through a full cycle before we leave, so you can see it working. If something isn’t right after a repair, call us and we’ll make it right.
Clear the floor in front of the door and move anything away from the tracks, so the technician has room to work. If the door is stuck open or partway, don’t force it – leave it as it is and tell us when you book. Have the door’s brand and model handy if you know it, since that helps us plan the right parts.
Schedule Your Garage Door Repair Service in Kent Today
Don’t let a broken door keep your car trapped or your home open. Call (866) 937-7308 for garage door repair in Kent – we answer 24/7, with fast dispatch 7am-7pm, Sunday through Friday. You’ll get a free, no-obligation estimate, a written price before any work starts, and same-day service when the schedule allows. Back up and running is the goal, and we’ll get you there.
Written by the team at Kent Garage Door Repair Co.