Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Kent?
Garage door repair in Kent typically costs between $150 and $600, depending on what failed and how many parts are involved. A single spring replacement is usually $180-$340, while smaller fixes like rollers or track realignment land closer to $110-$240. We give a written estimate before any work starts, and that estimate sets the final price.
If your door is stuck open, off its tracks, or hanging from a broken cable, call (866) 937-7308. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We’re Kent Garage Door Repair Co, and we work on the brand you already have. That matters more than most homeowners expect: a technician who knows LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor hardware can usually diagnose the problem on the first visit instead of ordering a part and coming back a second time.
Key Takeaways
- Most garage door repair jobs in Kent fall between $150 and $600.
- Springs are priced per spring. A matched pair costs about twice the single-spring range because both usually get replaced together.
- Opener repairs run $120-$320. A new opener installed is $250-$550.
- A full new door installed is $700-$2200. Repair usually costs less than replacement, and we’ll tell you plainly when it doesn’t.
- Estimates are free and the written quote sets the price.
Garage Door Repair Cost Breakdown (2026)
These are typical estimated ranges for the Kent market. Older doors, bent sections, and unusual hardware can push a job toward the top of a range or past it, which is why the written estimate matters more than any table.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150-$600 |
| Spring repair (one spring) | $180-$340 |
| Spring repair (matched pair) | About twice the single-spring range |
| Cable repair | $130-$250 |
| Opener repair | $120-$320 |
| Opener installation | $250-$550 |
| Panel replacement | $250-$500 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| New door installation | $700-$2200 |
What moves a job up or down inside those ranges? The number of parts, the condition of the door, and how much disassembly is needed to reach the failure. A door with one worn roller is a quick fix. A door that jumped its track and bent two hinges on the way down is a different afternoon. Spring work sits in its own category because torsion springs are priced individually: a single-spring replacement falls in the $180-$340 range, and because springs wear as a matched set, most homes replace both at once, which roughly doubles that figure.
Opener work splits along the same lines. A gear, logic board, or safety sensor fix typically runs $120-$320. If the opener itself is finished, a replacement installed is $250-$550. We service openers from LiftMaster, Chamberlain, Genie, and Craftsman, including the smart-home-connected models that have become common on newer Kent builds.
What Affects Garage Door Repair Pricing in Kent
- Which system failed. Springs, cables, openers, and panels each carry their own parts cost and labor. A cable repair at $130-$250 is often the cheapest structural fix, while a panel replacement at $250-$500 depends on matching a door style that may no longer be in production.
- Door age and hardware. Homes across Kent’s older neighborhoods, from the Scenic Hill area to East Hill, often have doors that have been through several spring cycles. Older hardware sometimes means a bolt that won’t budge or a bracket that needs replacing along with the part you called about.
- Door type and weight. A single-car door and a double-car door use different spring sizes and different track lengths. Heavier insulated doors need heavier hardware, and that shows up in the parts line.
- Whether it’s one part or several. A snapped spring often takes a cable with it. Replacing both in one visit costs less than two separate visits, and it’s the honest recommendation when the parts fail together.
- Repair versus replacement. A door with a bent bottom section and worn rollers may be a repair. A door with rusted-through panels and failing hardware usually costs more to keep alive than to replace. We look at the whole door before quoting.
- Weather exposure. Kent’s wet winters and the occasional hard freeze work on steel, wood, and the seals around them. Doors on wind-exposed sides of a house tend to show worn weatherstripping and loosened fasteners sooner, and those small items add to a repair ticket when they’re addressed at the same time.
How to Save on Garage Door Repair
The single biggest saver is catching a problem before it becomes two problems. A door that’s started to squeal or hesitate is usually a roller or a worn bearing, and that’s a $110-$220 fix. Wait until the cable snaps and you’re looking at cable and spring work in the same visit.
- Get the estimate in writing before work starts. Free estimates mean you can compare without paying for the privilege. Call (866) 937-7308 and we’ll walk through what the job involves.
- Ask whether a repair is genuinely the cheaper path. We take a repair-first approach because most doors don’t need replacing. But if the repair quote creeps toward the low end of the $700-$2200 installation range, replacement starts to make financial sense, and we’ll say so.
- Deal with the opener separately from the door. Sometimes the door is fine and the opener is the problem, or the reverse. Diagnosing which one is failing keeps you from paying for the wrong repair.
- Don’t attempt spring or cable work yourself. A torsion spring under tension can cause serious injury, and this is a two-person job with proper winding bars and the right knowledge. The savings from a DIY attempt are never worth the risk.
- Bundle minor items into one visit. If a technician is already out for a track realignment, having worn rollers swapped at the same time usually costs less than booking a second appointment.
Can You Fix My Garage Door the Same Day?
Yes, most garage door repairs in Kent can be handled the same day. Springs, cables, rollers, and opener faults are the kinds of jobs a technician can complete in a single visit when the parts are standard. Call (866) 937-7308 and we’ll give you a straight answer on timing. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Emergency service is a real offering here, not a marketing line. If a door is stuck open and the house is unsecured, or a car is trapped inside, that’s the kind of call we take seriously. We dispatch a trained technician with the tools to make the door safe, which sometimes means stabilizing it first and completing the repair in the same visit.
Is It Cheaper to Repair or Replace a Garage Door in Kent?
Repair is usually cheaper, and by a wide margin. Most fixes fall in the $150-$600 range against $700-$2200 for a new door installed. Replacement only wins when the door has structural damage across multiple panels, when the hardware is failing throughout, or when the repair cost approaches the installation range. A door with one bent panel is a $250-$500 panel replacement. A door with three bent panels, rusted tracks, and tired springs is a replacement conversation. We’ll give you both numbers and let you decide.
What Does Emergency Garage Door Service Cost in Kent?
Emergency garage door service is priced the same way as any other repair: per job, by the written estimate. The range for the work doesn’t change because it’s urgent. What changes is how fast we get to you. Call (866) 937-7308 and we’ll set up the earliest dispatch. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
How Much Does a New Garage Door Opener Cost in Kent?
A new opener installed in Kent typically runs $250-$550. That covers the unit and the labor to mount it, wire it, and pair the remotes and keypad. If you already have an opener that’s just misbehaving, repair at $120-$320 is usually the better call, and we service LiftMaster, Chamberlain, Genie, and Craftsman units including the connected models. Call (866) 937-7308 for an exact figure on your door.
Why Spring Repair Pricing Works Differently
Torsion springs are the most misunderstood line on any garage door bill. The $180-$340 range covers one spring, replacement, and the labor to wind it safely. Because springs are usually installed as a matched pair and wear at the same rate, replacing just one and leaving the other is a false economy: the older spring often fails soon after, and you pay for a second visit. A pair costs about twice the single-spring range, and that’s the honest number to budget for when one spring snaps.
This is also the part of a garage door job that should never be handled by anyone without training. A wound torsion spring stores an enormous amount of energy. Trained technicians use proper winding bars, secure the door first, and work in pairs. Our technicians have up to 15 years of experience with this exact work, and the reason we emphasize it is simple: the safety protocols are what make the job predictable.
What’s Included in a Free Estimate
A free estimate means we come out, look at the door, identify the failure, and give you a written price before anything is touched. No service-call fee, no diagnostic charge, no surprise line items. The estimate covers the parts and labor for the specific job, and it holds. If we open the door and find something the initial look didn’t reveal, we tell you before we proceed, not after.
For a straightforward job like a roller swap or a track realignment, the estimate is quick. For a full door replacement, we’ll take measurements, check the opening, and talk through panel styles and insulation levels so you can compare options within the $700-$2200 range. Call (866) 937-7308 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Kent?
Garage door repair in Kent typically costs $150-$600. The exact figure depends on which parts failed: a roller replacement runs $110-$220, while a spring job or panel replacement sits higher in the range. Call (866) 937-7308 for an exact quote. Estimates are free.
How much does a broken spring repair cost in Kent?
A single spring replacement typically runs $180-$340. If both springs are replaced as a matched pair, expect about twice that range. Springs usually wear together, so a pair is the common recommendation. Call (866) 937-7308 to confirm the price for your door.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper. Most repairs fall between $150 and $600, while a new door installed runs $700-$2200. Replacement only makes sense when damage spans multiple panels or the hardware is failing throughout. Call (866) 937-7308 and we’ll quote both so you can compare.
Can you come today?
Yes, same-day service is usually possible for standard repairs in Kent. Springs, cables, rollers, and opener faults are commonly finished in one visit. Call (866) 937-7308 and we’ll confirm the earliest dispatch. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How much does an opener repair cost in Kent?
Opener repair typically runs $120-$320, depending on whether it’s a sensor, gear, or circuit board issue. If the opener needs replacing instead, installation is $250-$550. Call (866) 937-7308 for a free estimate on your specific unit.
Do you charge more for emergency calls?
No. Emergency garage door service in Kent is priced per job by the written estimate, the same as any other repair. The $150-$600 repair range applies regardless of when you call. Call (866) 937-7308 to set up dispatch.
Get Your Free Estimate
If your door is stuck, noisy, or just not behaving the way it used to, the fastest way to a real number is a phone call. Call (866) 937-7308. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’ll look at the door, tell you what failed, and give you a written price before any work begins.
Pricing reflects the Kent market as of 2026. Kent Garage Door Repair Co offers free estimates – call (866) 937-7308.
Written by the team at Kent Garage Door Repair Co.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Nathan Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Neil Rao"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Mendoza