Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Kent?
Spring repair in Kent typically costs $180 – $340 for one spring, and most homeowners end up paying toward the top of that range once the job is done. Here’s the catch: garage doors almost always run a matched pair of springs, and replacing both costs roughly twice the single-spring range. Your written estimate sets the final price, and we give that estimate for free.
A torsion spring that snaps at 6am leaves your car trapped behind a door that won’t budge. We work on the brands you actually own, including Clopay, Amarr, Wayne Dalton, and Raynor, so the technician who shows up already knows the hardware on your door. Spring repair is a two-person, proper-tools job, and we treat it that way.
Key Takeaways
- One spring typically runs $180 – $340 in Kent; a matched pair is about double.
- What you pay depends on spring type, door weight, and whether the door also needs cables or rollers.
- Springs fail from cycles, not age alone. A door used twice a day lasts far longer than one used a dozen times a day.
- Never let anyone work under a door with a broken spring. Call us first.
- Emergency service is available when a broken door leaves your home unsecured or your vehicle stuck.
Spring Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Kent market. Every door is different, so treat these as a starting point, not a quote. The written estimate we hand you before any work begins is the price you pay.
| What’s being done | Typical estimated range |
|---|---|
| Spring repair or replacement, one spring | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (often needed when a spring lets go) | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
| New door installation | $700 – $2,200 |
Most spring jobs land in the general repair band of $150 – $600 because a snapped spring rarely travels alone. The stored tension in a torsion spring lets go all at once, and the cables, drums, and bottom brackets take the shock. When we open the door up, we usually find a stretched cable or a roller that’s been grinding for a year. We tell you what we find before we do anything about it.
On the cheaper end, a single extension spring on a light one-car door is a quick swap. On the higher end, a heavy two-car door with a torsion setup, both springs gone, and a cable that unwound mid-failure takes longer and more parts. The door itself staying put is not a sign it’s fine. A door with one broken spring is hanging on the remaining one, and that one is now carrying double the load.
What Affects Spring Replacement Pricing in Kent
Four things move a spring estimate up or down. None of them are guesswork when a technician is standing in front of the door.
- Spring type and count. Extension springs above the tracks cost less to replace than the torsion springs that run on a shaft across the top of the door. Torsion is the standard on most newer Kent homes, and a matched pair is a bigger job than a single spring.
- Door weight and size. A one-car door with a thin steel skin needs lighter springs than a two-car insulated door. Heavier doors need heavier wire in the spring, and that changes the price.
- Condition of the cables, drums, and rollers. If the cables are frayed or the rollers are flat-spotted, replacing only the spring means you’ll be back in six months. We quote the parts that actually need replacing, and we explain why.
- Whether the door has been sitting broken. A door that’s been stuck open or stuck shut for weeks bends panels and wears tracks unevenly. That work is separate from the spring but often shows up on the same visit.
- Access and clearance. A low ceiling, a tight side clearance, or a low-headroom track setup on some Kent garages means the technician works in a tighter space. That can add time.
- Brand and age of the hardware. We service springs and openers on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so we’re familiar with the exact parts before we arrive.
One thing that doesn’t change in Kent: the moisture. Fall and winter rain rolls off roofs and sits against garage doors that face west or north. Springs themselves are steel and will eventually rust through, especially if the door has been painted over its springs or the bottom seal is letting water in. Rusted spring coils are weaker and tend to snap without warning. If you see brown staining or flakes on the coils, it’s worth having them checked before they fail at a bad moment.
Repair or Replace? What Makes Sense for Your Door
If the door panels, tracks, and opener are sound, replace the springs and keep the door. Most doors in Kent have plenty of life left in the door itself when only the springs have failed. Springs are a wear part, like brake pads. The door is the car.
Replacement starts making more sense when the door is badly dented, the panels are separating, or the tracks are bent beyond a simple realignment. New door installation runs a typical estimated $700 – $2,200 in Kent, so it’s worth comparing that to a repair before you commit. Our habit is to tell you when a repair is the better call, even if a new door would be the bigger sale.
If you’re specifically trying to understand how springs age out, our guide to spring replacement walks through what happens inside the coil and why a snapped spring sounds like a gunshot. It’s the page to read before you call, and it’ll make the conversation faster when you do.
How to Save on Spring Replacement
Spring replacement isn’t a job with much room to shop around on parts, but there are real ways to control the bill:
- Replace the pair together. If one spring of a matched pair has broken, the second is on borrowed time. Doing both in one visit saves a second service call later and gets you a longer stretch of trouble-free operation.
- Get the estimate before the work. A free estimate means you know the number before anyone touches the door. We give you the range and the parts needed up front, then the written estimate sets the final price.
- Don’t run the opener on a broken spring. The motor will strain, the door will jerk, and you’ll add opener repair ($120 – $320 typical) to a job that was already expensive. Stop using the door and call.
- Ask about the rest of the door while the technician is there. Catching a frayed cable or a worn roller during a spring visit is cheaper than a separate trip. Rollers run $110 – $220, cables $130 – $250, and a technician already on-site can flag both.
- Keep the door balanced and lubricated. A door that’s been running smoothly wears its springs more evenly. A squirt of garage-door lubricant on the hinges, rollers, and track twice a year is cheap insurance, and it keeps the springs from working against a dry track.
For an exact quote on your door, call (866) 937-7308 for a free estimate. We’ll tell you what your spring setup needs and what it will cost before we start.
Why Spring Repair Isn’t a DIY Job
We get asked this often enough that it’s worth saying plainly: torsion springs store enough energy to break bones, and a spring under tension can fail the moment someone touches it without the right winding bars. This isn’t a warning to scare you. It’s the reason trained technicians work in pairs with the correct tools, and it’s why we won’t walk a homeowner through a spring swap over the phone. The risk isn’t worth saving the labor.
Our technicians have up to 15 years of experience working on springs, so they know what a spring under load looks like before it goes, and they know how to bring the door down safely. If your spring has snapped, keep everyone clear of the door, don’t try to open it, and call us. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Happens When You Call
You’ll talk to someone who can help you schedule the visit, not a recording that promises a callback. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The estimate is free, and the price is set per job by the written estimate.
Emergency service is available when a broken door means your home is unsecured or your vehicle is trapped. A car stuck behind a dead door is the most common call we get, followed by a door left hanging open after a spring let go. Same-day service is often possible when you call early in the day.
We handle spring repair, opener repair, cable and track work, and new installation under one roof, so you won’t need to track down a second contractor if the job turns out to be bigger than expected. Our technicians work on the brands you already own. That matters when a warranty question or a specific opener model is involved, and it means we’re not steering you toward a full replacement you don’t need.
FAQs About Spring Replacement Cost
How much does garage door spring replacement cost in Kent?
Spring replacement in Kent typically costs $180 – $340 for a single spring, with a matched pair usually about twice that. The written estimate sets the final price, and the estimate itself is free. Call (866) 937-7308 for an exact quote.
Do I really need to replace both springs if only one is broken?
Yes, in most cases. A matched pair is designed to share the load evenly, so once one spring lets go, the other is carrying double the stress and is usually close to the end of its life. Replacing both in one visit typically costs about twice the single-spring range but saves you a second service call later. Call (866) 937-7308 to talk through your setup.
Why does my spring break in cold weather?
Cold metal gets more brittle, and the rain and humidity Kent gets from fall through spring leave condensation on spring coils. Add the cycles a daily-used door piles up, and a weakened spring is more likely to snap on the first cold morning. If your door has been squeaking or the spring looks rusty, have it checked before it fails. Call (866) 937-7308 for a free estimate.
Can you fix a broken spring the same day?
Often, yes. Same-day service is common when you call early in the day and the parts needed match what’s on your door. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 937-7308 to book it.
Is it cheaper to repair or replace the whole door if the spring breaks?
Spring repair is almost always cheaper than a new door: a typical spring job falls in the $180 – $340 range for one spring, against $700 – $2,200 for a new door installation. Replacement only makes sense when the panels or tracks are damaged too. Call (866) 937-7308 and we’ll tell you which one your door needs.
Does spring replacement come with a warranty?
Parts and labor are covered per the terms on your written estimate, and the technician will explain what’s covered before the work starts. The estimate also details exactly which springs and parts go into your door, so there are no surprises. Call (866) 937-7308 with questions about coverage on your specific door.
Getting a Straight Number in Kent
Springs don’t need to be a mystery. You have a rough range, you know the variables, and you know the part of the job that isn’t safe to handle yourself. What’s left is a look at your door and a written estimate.
Our technicians have up to 15 years of experience, we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor hardware, and we approach every door with a repair-first mindset. If the spring is the problem, we’ll fix the spring. If more is going on, we’ll show you and let you decide. If you’re new to the company, our Kent Garage Door Repair Co homepage covers the full range of what we do, from broken springs to full installations and opener issues across the brands we support.
Call (866) 937-7308 for a free estimate on your spring replacement. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll get you back up and running.
Pricing reflects the Kent market as of 2026. Kent Garage Door Repair Co offers free estimates – call (866) 937-7308.
Written by the team at Kent Garage Door Repair Co.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Nathan Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Neil Rao"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Mendoza