Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Kent?
Panel replacement in Kent typically costs $250 – $500 per section, depending on the door type, panel material, and whether the section is a stock profile or a custom match. That’s the estimate range we see most often for a single damaged section on a residential door. The written estimate sets the final price once we’ve looked at the door and confirmed the panel and hardware.
A dented or cracked section doesn’t always mean the whole door needs replacing. On most sectional doors, one damaged panel can come out and a matching one goes in, which keeps the job small and the cost well below a new door. We work on the brand you already have, which matters here because Kent’s housing stock runs from older ranch homes near downtown to newer builds up the East Hill, and the doors on those houses aren’t all the same.
If you’re weighing repair against replacement, call (866) 937-7308 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
Here’s what panel work runs in Kent right now. Every figure below is a typical estimate for the Kent market, not a quote. Your written estimate is the price.
| Line Item | Typical Estimated Range |
|---|---|
| Single panel replacement (standard steel) | $250 – $500 |
| Panel replacement, insulated or wood-look section | $250 – $500 |
| Panel plus roller replacement | $110 – $220 (rollers) |
| Panel plus track realignment | $120 – $240 (track) |
| Panel plus cable repair (if the impact damaged a cable) | $130 – $250 (cable) |
| Panel plus spring work (if the impact stressed the springs) | $180 – $340 (one spring) |
| Full garage door repair (panel plus related fixes) | $150 – $600 |
| New door installation (if the damage is too widespread) | $700 – $2200 |
Two things push the price up on a Kent panel job: the panel profile and what the impact did underneath it. A stock steel panel on a common door brand runs toward the low end. A discontinued profile, a wood-look section, or a color that has to be custom-ordered pushes toward the top. And when a car backs into a door or a storm knocks a branch into it, the dented panel is usually the visible damage. The cables, rollers, and track behind it take the load and sometimes bend or fray at the same time. We check all of it before quoting, because replacing a panel onto a bent track just means the new section binds on the way up.
What Affects Panel Replacement Pricing in Kent
- Door brand and panel availability. We’re certified to service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When your door is one of those, we know the exact panel profile and hardware, so the section matches and the job stays simple. An uncommon or discontinued door can mean a longer lead on the panel.
- Panel material. Standard steel is the most economical. Insulated sections, wood-look steel, and full wood panels cost more because the material and the finish matching take more work.
- How many sections are damaged. One panel is the common case. Two or three adjacent sections start to approach the cost of a new door, and that’s the point where we’ll talk honestly about which makes more sense.
- Hidden damage to the rest of the door system. Kent gets real wind and rain in the fall and winter, and a door that’s been hit or blown against its stops can have a bent track or a stressed spring underneath the visible dent. That’s additional line-item work, listed separately on the estimate.
- Whether the door is on a slope or an oversized opening. Some Kent homes on the hillsides have wider or taller openings, and those panels cost more.
- Color matching. If the rest of the door has faded in the sun, a new panel can read slightly different in tone. Some homeowners choose to replace a pair of sections or paint the whole door to even it out. We’ll tell you what to expect before the panel is ordered.
How to Save on Panel Replacement
The biggest saving is catching the damage before it spreads. A small dent or a hairline crack in one section is a panel job. Left alone through a wet Kent winter, water gets behind the panel edge, the steel starts to rust, and the repair gets bigger. Get it looked at early and you stay in the low end of the range.
A few practical ways to keep the cost down:
- Fix the panel, not the door. If one section is damaged and the rest of the door is sound, replace the section. Full panel replacement on a single section is a fraction of a new door.
- Bundle related repairs in one visit. If the rollers are worn or the track is slightly off, doing it during the same appointment saves a second visit and often saves a second call.
- Ask about matching an existing profile. When we can source a panel that matches your current door brand, the job avoids custom fabrication.
- Get the estimate in writing before work starts. We give you the written price up front so there are no surprises when the job’s done.
- Don’t attempt a spring or cable fix yourself. Spring repair is a two-person, proper-tools job. The torsion spring above your door holds enough stored force to cause serious injury. If your panel damage came with a spring or cable problem, leave it to trained technicians. That’s not a sales pitch; it’s the part of the job that actually hurts people.
We offer free estimates, so there’s no cost to finding out which end of the range your job falls on. Call (866) 937-7308 and we’ll get you a straight answer.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Kent?
Panel replacement in Kent typically runs $250 – $500 for a single section, depending on material and panel availability. Insulated or custom-profile panels sit at the top of that range. Call (866) 937-7308 for a free estimate; the written quote sets the final price.
Is it cheaper to repair a panel or replace the whole door?
Repairing a single panel is almost always cheaper than a new door. One section runs $250 – $500, while a full new door installation runs $700 – $2200. The exception is when three or more sections are damaged or the door is old enough that a matching panel is hard to find; then replacement can make more sense. Call (866) 937-7308 and we’ll tell you which is the better call for your door.
Can you replace just one panel on my garage door?
Yes. In most cases one damaged section can be swapped for a matching panel without touching the rest of the door. We work on the brand you already have, including Clopay, Amarr, Wayne Dalton, and Raynor doors common in Kent. Call (866) 937-7308 to book an estimate.
Do you offer same-day panel replacement in Kent?
Same-day service is often possible when the panel is a stock profile we can source quickly. More complex panels may need a day or two for the section to arrive. Call (866) 937-7308. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What if the impact also damaged my springs or cables?
Panel damage sometimes comes with cable or spring damage underneath, and that adds $130 – $250 for cable repair or $180 – $340 for one spring. Spring work is always handled by trained technicians using proper tools, never as a DIY fix. Call (866) 937-7308 for a full estimate that covers everything at once.
Whether your door took a hit from a car, a storm, or plain wear, the fastest way to know what it’ll cost is to have us look. We handle garage door repair in Kent, WA every week, including the panel and hardware work that goes with it, and we keep the repair-first approach at the front: fix the door you have before suggesting a new one. If you’re also dealing with a door that won’t open smoothly, that’s usually garage door repair in Kent, WA territory and worth checking at the same visit. For a full replacement, our garage door installation in Kent, WA covers brand options across the doors we service. Spring trouble behind a damaged panel is garage door spring repair in Kent, WA, and it’s a job for trained technicians, not a weekend project. If the opener is also acting up, garage door opener repair in Kent, WA handles both legacy and smart-home-integrated LiftMaster, Chamberlain, Genie, and Craftsman systems. We also serve nearby homeowners with the same panel and repair work: garage door repair in Auburn, WA, garage door repair in Renton, WA, garage door repair in Federal Way, WA, and garage door repair in Covington, WA.
Our technicians have up to 15 years of experience, and they arrive familiar with the exact hardware on the job. If your panel is damaged and you want a number before you decide, call (866) 937-7308 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Kent market as of 2026. Kent Garage Door Repair Co offers free estimates – call (866) 937-7308.
Written by the team at Kent Garage Door Repair Co.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Nathan Hayes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Neil Rao"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Mendoza