Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Kent Homeowners
If your garage door won’t lift, slams down hard, or a loud bang came from above the door, a broken spring is almost always the cause. We handle spring repair for Kent homes with trained technicians who work on the brand you already have, not a replacement they’d rather sell you. Our technicians have up to 15 years of experience, and we service eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Springs are the one part of a garage door that can hurt you, so this isn’t a job to take on with a ladder and a pair of vise grips. Spring repair is a two-person, proper-tools job. We quote the work in writing and agree the price before anything starts. Same-day service is often possible. Call (866) 937-7308 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
What Our Garage Door Spring Repair Service Includes
Most spring work falls into a handful of jobs. Here’s what each one involves and when it applies to your door.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a metal shaft above the door, and it does the heavy lifting as the door opens and closes. When it breaks, you usually hear a sharp snap and the door stops working or becomes too heavy to lift by hand. We replace torsion springs on the door you have, matching the spring to the door’s weight and height so it operates the way it was built to, then balance the door and test it through a full cycle before we leave.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door goes up. Older homes in Kent often still have them, and they wear out at the loops and hooks over time. We replace them in matched pairs, since a new spring working against an old one throws the door out of balance, and we add a safety containment cable on each side while we’re up there.
Broken Spring Repair
A broken spring is the call we get most, and it’s usually obvious: the door is stuck, the opener strains, or you can see a gap in the coil. The door may also come down faster than it should, which is a real hazard for anyone standing under it. We confirm the break, check whether the other spring is near the end of its life, and give you a written price for what needs replacing before we touch anything.
Spring Adjustment
Sometimes the spring isn’t broken, just out of tune. A door that feels heavy, drifts down on its own, or reverses before it reaches the floor can usually be fixed by adjusting spring tension. This is precision work done with winding bars and a scale, not guesswork, and it depends on getting the balance right for your specific door. We adjust and then run the door through open and close cycles to confirm it holds.
Safety Cable Installation
Extension springs need a safety cable threaded through the center so that if the spring ever lets go, it’s contained instead of flying across the garage. Many older installs skip this, and it’s one of the cheapest safety upgrades you can make. We fit cables on both sides and check that they’re anchored correctly at each end.
Spring Inspection
Springs don’t always fail with a bang. They stretch, lose tension, and develop small gaps over time, and a door that’s getting harder to lift is often telling you something. During an inspection we check both springs, the cables, the drums, and the door’s balance, then tell you honestly whether you need a repair now or can wait. If it’s fine, we’ll say so.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We service Amarr doors and know the spring setups they use, including the heavier panels that call for a matched pair rated to the door’s weight. Amarr builds a wide range of residential doors, and the spring hardware varies between models, so matching the replacement to your specific door matters more than grabbing whatever’s on a shelf.
Wayne Dalton and Raynor doors show up across Kent neighborhoods, and each has its own quirks. Wayne Dalton has used torsion and extension setups over the years, and knowing which one you have saves time on the diagnosis. Raynor doors often run on torsion springs sized for the door’s exact weight, so we measure before we order. Craftsman-branded doors and openers are common too, and we handle the spring side of those systems the same way. Whether you have one of these or another make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. That snap is often the torsion spring breaking, and it usually happens when the door is closed or just starting to open. The door will feel extremely heavy afterward and shouldn’t be forced.
- The door won’t lift or feels dead heavy. When the spring stops doing its job, the opener or your arms take the full weight of the door. That’s a sign to stop using it and get it looked at.
- The door slams down instead of lowering smoothly. A door that drops fast is a safety problem, especially with kids or pets around. A failing spring is usually behind it.
- You can see a gap in the coil. A visible break in a torsion spring means it’s done. Don’t try to open the door and don’t stand under it while you look.
- The opener strains or the door reverses. If your LiftMaster or Chamberlain opener is working harder than it used to, the spring may be losing tension. It’s worth checking before the opener burns out too.
Springs are under serious tension, so please don’t try to wind, cut, or remove one yourself. This is a trained-technician job with the right tools and two people on it.
Our Garage Door Spring Repair Process – Step by Step
- 1
You call and we ask a few questions. We find out what the door is doing, what brand it is, and whether the door is stuck open or closed. That helps us bring the right springs on the first visit.
- 2
We inspect the whole spring system. We check both springs, the cables, drums, and the door’s balance. If the second spring is close to failing, we’ll tell you, so you’re not paying for two visits.
- 3
You get a written estimate before any work. We explain what needs replacing and why, and the price is agreed before we start. The written estimate sets the final price.
- 4
We do the repair with the right tools. Winding bars, proper containment, and a two-person approach on the torsion shaft. The old springs come down safely and the new ones go up matched to your door.
- 5
We balance and test the door, then clean up. The door gets run through open and close cycles so we know it’s working right, and we leave the garage the way we found it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Kent?
A typical spring repair in Kent runs $180 – $340 for one spring, depending on the type of spring and the door it’s on. That range covers torsion or extension spring replacement on a standard residential door, including the labor to wind, balance, and test. Because springs are usually replaced in matched pairs, a pair runs about twice that range.
Other common repairs we quote alongside spring work:
| Service | Typical estimated range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
What moves the price: the type and size of spring, whether one or both are being replaced, and whether the cables or drums show wear while we’re in there. To avoid overpaying, ask for a written estimate that lists parts and labor separately, and ask whether the second spring is worth replacing now rather than later. Our estimates are free, and we’ll tell you if a repair isn’t needed.
Garage Door Spring Repair Near Kent – Our Service Area
We take spring repair calls across Kent and the surrounding area, including Fairwood, Covington, Auburn, Renton, Tukwila, SeaTac, Des Moines, Federal Way, and Lake Morton-Berrydale. Response times vary with traffic on Highway 167 and South 277th, so we’ll give you a realistic window when you call. For nearby coverage, see our garage door spring repair page for Lakeland North, and our garage door spring repair page for Des Moines homeowners.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Kent
Garage door spring repair means replacing or adjusting the springs that counterbalance your door’s weight so the opener and your arms don’t have to lift it alone. It covers torsion springs on the shaft above the door and extension springs along the tracks. The work also includes checking cables, drums, and balance so the door works properly afterward. We handle all of it with trained technicians and the right tools.
Most single-spring replacements take about an hour once we’re on site, and a matched pair or a job with worn cables runs a bit longer. The inspection and estimate come first, so you’ll know the scope before work starts. We won’t rush the winding and testing, since that’s where the safety matters. Call (866) 937-7308 for a time window.
Spring repair in Kent typically runs $180 – $340 for one spring, and about twice that for a matched pair. The written estimate sets the final price, and we agree it with you before any work begins. Call (866) 937-7308 for an exact quote. Estimates are free.
Yes, we service Wayne Dalton, Raynor, Craftsman, and other major brands including Amarr. We know where each brand’s spring hardware tends to wear out, so the diagnosis is faster. Tell us the brand and model when you call, and we’ll come prepared. If you aren’t sure of the brand, we can figure it out on the visit.
Same-day service is often available for spring repairs in Kent. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 937-7308 and we’ll give you a realistic arrival window.
We stand behind our work, and we’ll explain the coverage on your specific repair in writing before we start. Ask about it when you get the estimate so there are no surprises later. The estimate and the warranty terms are both agreed up front. Call (866) 937-7308 to talk through the details.
Clear the floor in front of and under the door so we have room to work, and keep the door closed and unused until we arrive. Don’t try to force it open or remove the spring, since that’s genuinely dangerous. If the door is stuck open, tell us when you call so we can plan for it. That’s all you need to do.
Schedule Your Garage Door Spring Repair Service in Kent Today
A broken spring takes a door out of service and puts strain on everything else. We can usually get you back up and running with same-day service, a written price agreed before we start, and technicians who know your door’s brand. See our full Kent Garage Door Repair Co services, or read our guide to garage door spring repair. Call (866) 937-7308 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Written by the team at Kent Garage Door Repair Co.