Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Federal Way
Federal Way garages are working garages. A lot of homes here sit on larger lots with a detached shop out back, and those oversize doors take a heavier beating than anything on a standard tract house. We plan the job around that, not around a builder-grade catalog. That means measuring for the right torsion setup, ordering springs and an opener that can actually carry the weight, and getting it done in one trip instead of three. Our technicians have up to 15 years of experience, and we handle the full scope – new door installation, opener work, spring repair, and emergency service – instead of sending you to a second contractor halfway through. Call (866) 937-7308 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm Sunday through Friday.
Why Federal Way Homeowners Call Kent Garage Door Repair Co for Garage Door Installation
Federal Way is a town of self-reliant homeowners, and they tend to want a straight answer on their first call. We give one: what the door needs, what it will cost, and whether the existing hardware can be saved. No upsell on a door that has years left in it.
We’re certified to service eight major garage door brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so the technician who arrives already knows the hardware on your garage. That matters most on the older east-side streets where an original door has been repainted, patched, or retrofitted with an opener that never quite matched.
We keep a repair-first approach where it makes sense and a clear replacement recommendation where it doesn’t. Spring work is a two-person, proper-tools job, and we treat it that way. Ask around Federal Way and you’ll find neighbors who’ve used us and will say the quote held.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Federal Way
New Door Installation
A typical new door installation in Federal Way runs $700 – $2,200, and the written estimate sets the final price. Federal Way’s split-level and ranch homes often have garages tucked under the main floor or set at the end of a sloped drive, so installation frequently calls for low-headroom torsion or high-lift track rather than the off-the-shelf setup. We measure both headroom and drive slope before ordering anything, so the door that arrives fits the opening you actually have.

Double Car Door
Most houses here have an attached two-car garage facing the street, and a double car door replacement is a curb-appeal decision as much as a functional one. Homeowners on the west-side hillside subdivisions want carriage-house or full-view styles rather than builder-grade panels, and the sloped driveways there often mean the standard hardware won’t clear the ceiling. We spec the double car door and its torsion system together.

Custom Garage Door
This is where Federal Way’s acreage properties separate from the rest. A detached shop with a 10- or 12-foot-wide opening can’t safely ride on standard extension springs, and a builder-grade opener will strain and fail early. We size high-cycle torsion springs and a heavier opener with a reinforced rail to the real weight of the door, then check track alignment and balance before finishing the weather seal. A custom garage door done right is a one-trip project.

Steel Doors
Steel doors are the practical pick for a wet Puget Sound climate, and this town sees months of persistent drizzle. Steel resists the swelling and delamination that wood doors fight, though the bottom section seams are where rust starts first. We look at drainage around the threshold and the condition of the bottom section before recommending a full door or just a panel replacement. Our garage door installation team can walk you through the options.
Single Car Door
On the older ranch ramblers and split-levels, a single car door replacement is usually the simpler job: standard 8×7 openings, straightforward torsion, and no slope complication. Even here, we check the framing and track before installation, because a warped opening will make a new door bind within a season.
Trusted Brands We Service in Federal Way
We work on the brand you already have. That includes LiftMaster and Chamberlain openers, plus Clopay and Amarr doors, along with Genie, Craftsman, Wayne Dalton, and Raynor. When a manufacturer’s hardware on your garage is one we know, the installation plan comes together faster and the parts are easier to source. We don’t stock parts locally, so we order to the job and confirm lead times up front. If your door or opener brand is on that list, you’re in good shape. If it isn’t, ask before you book and we’ll tell you honestly.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Federal Way Homes
- Rot hidden under fresh paint. Original wood-panel doors from the 1960s and 70s still hang on some east-side streets, and a recent coat of paint can hide soft framing underneath. Installation estimates on those homes sometimes miss the underlying damage until the old door comes off.
- Sloped driveways on the west-side hills. Homes on the hillside subdivisions often have shallow garage ceilings and a driveway that drops away, which requires high-lift or low-headroom torsion. Off-the-shelf doors and openers arrive with standard hardware that won’t fit.
- Oversized detached-shop doors. A 10- to 12-foot-wide shop door exceeds what standard extension springs and openers can carry. Replaced with builder-grade components, those doors fail early and strain the opener every cycle.
- Freeze-thaw stress in the wet season. Around 30°F, the freeze-thaw cycles put extra load on opener and spring hardware, and steel bottom sections take the worst of the moisture. We check balance and weather seal as part of any installation.
Pricing for Garage Door Installation in Federal Way, WA
Here’s what installation typically runs in Federal Way. These are estimated ranges, and your written estimate sets the final price.
| Service | Typical Federal Way estimate |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
What moves the number: door size and material, whether you need high-lift or low-headroom torsion, the capacity of the opener, and any frame repair found once the old door is removed. An oversize shop door lands near the top of the range because of the heavier springs and reinforced opener rail. We quote and agree the price with you before any work starts, and the estimate is free. Call (866) 937-7308 to book a measure.
We Also Serve Cities Near Federal Way
Federal Way is our focus on this page, but we also work the surrounding towns, including Lakeland North, Auburn, Lakeland South, and Kent. If you’re just across the line and need a door measured or replaced, call and we’ll set it up. See our Federal Way coverage for the full picture, or visit our hub on garage door installation.
Serving Federal Way, WA – Our Local Coverage Area
We serve Federal Way and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Federal Way
No. A standard double-car door and opener aren’t rated for a 10-foot-wide shop door’s weight, and pairing them will fail early. We spec high-cycle torsion springs and a heavier-duty opener with a reinforced rail for that size. Call (866) 937-7308 and we’ll measure the opening and the door weight before recommending anything.
It comes down to headroom above the door and the slope of your driveway. If the garage ceiling is shallow or the drive drops away, standard hardware won’t clear, and you’ll need a high-lift or low-headroom torsion setup. The reliable way to know is a measure on site. Call (866) 937-7308 for a free estimate.
Steel holds up better to Federal Way’s months of drizzle, because wood swells, warps, and delaminates with moisture. Steel resists that, though bottom section seams are where rust appears first. We’ll look at drainage and the bottom section before recommending a full door or a panel swap. Call (866) 937-7308 for a written price.
Often just the bottom section can be replaced, and a panel replacement in Federal Way typically runs $250 – $500. Whether a full installation is needed depends on whether the rust has reached the frame and track. We check that on site. Call (866) 937-7308 and we’ll tell you straight.
Ask what cycle rating the springs carry, because that’s what determines how long they last. For a heavier or oversize door, high-cycle torsion springs rated for 25,000 cycles are the right call. We’ll confirm the rating in writing with your estimate. Call (866) 937-7308 for a free measure.
When your Federal Way garage door needs replacing, we’ll measure it, spec the right torsion and opener for the opening you actually have, and quote it before any work starts. Emergency service is available for a door that’s left your home unsecured or your car trapped. Call (866) 937-7308 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Kent Garage Door Repair Co.